American Weigh AMW-1000 Digital Bench Jewelry Scale 1000x0.1g

American Weigh Scales, Inc. Features: Large stainless steel weighing surface Tare feature. Simple 4-key operation Hold feature 4 weighing modes: Grams, Pennyweights, Troy Ounces, Ounces Click HERE to purchase the *AC Adapter Sold Seperate Capacity1000g / 35.27oz / 32.15ozt / 643.08dwt Readability0.1g / 0.01oz / 0.01ozt / 0.1dwt Scale Dimensions 6.2 x 7.2 x 1.6 "" Platform Dimensions 6 x 6 "" WarrantyCalibration 10 Year Limited Warranty1000g Calibraton weight not included.To purchase CLICK HERE Power9V Battery (included) or AC-Adapter (sold seperate) AMW-BENCH ManualThank you for purchasing the American Weigh AMWBENCHseries digital tabletop scale. Please readall operating instructions carefully before use. Thiselectronic scale is a precision instrument. With normalcare and proper treatment, it will provide years ofreliable service.Never load the scale with more than the maximumcapacity. Overloading will permanently damage it!Avoid any exposure to extreme heat or cold. Yourscale works better when operated at normal roomtemperature. Always allow the scale to acclimate tonormal room temperature for at least one hour beforeuse. Give your scale sufficient warm up time. Usually30-60 seconds before calibration to give the internalcomponents a chance to stabilize.Keep your scale in a clean environment. Dust, dirt,moisture, vibration, air currents and a close distance toother electronic equipment can all cause an adverseeffect on the reliability and accuracy of your scale.Handle with care. Gently apply all items to be weighedonto tray top. Although this scale is designed to bequite durable, try to avoid rough treatment as this maypermanently damage the internal sensor.Avoid shaking, dropping or otherwise shocking thescale. This is a precision instrument and must behandled with extreme care.Only operate the scale on a stable, vibration freesurface.I. OPERATIONPlace Scale on a horizontal flat surface.1. Press [ON/OFF] key.2. Wait until ""0.0A is displayed.3. Put the object(s) on the weighing platform.4. Using the [MODE] key,